A customized Microscope Stage for
Motorized / Automated Disk Media Inspection

• Precision motorized stage for disk inspection applications requiring automation and ergonomics
• Joystick and programmable software control
• DC servo motors and rotary encoders in closed-loop system for guaranteed positioning
• Specially designed rotary axis provides 360 degrees of very precise concentric motion
• Thin cross-section (1.77- 2.11") allows stage to easily adapt to most microscopes
• Proprietary KORE-FRAME links X-Y axes in a single piece of metal for superior orthogonality and flatness (other stages use 4 extra components bolted together and are subject to assembly inaccuracies)
• Resolution of 0.5 um X(Y), .025 deg theta
• Smooth velocities from 6 mm/sec to 75 mm/sec
• Linear accuracy is laser calibrated to less than 1 micron error in 3000; flatness and straightness better than 1 in 5000; orthogonality exceeds 1 in 10,000
• Repeatability within 2 microns
• Precision stainless steel ACME lead screws provide fine resolution of 2 mm per revolution
• Single piece hardened steel bearing slides use cross-roller bearings for extra precision and rigidity (other stages use split triangular wires)

Also see KD-Series Non-Motorized Microscope Stages
Also see KD-Series Digital Measuring Microscope Stages
 

PART # DESCRIPTION 142-658-9# KDL64 Stage, 6x4x360°, X-Theta Motorized, manual Y-axis 142-678-9# KDL66 Stage, 6x6x360°, X-Theta Motorized, manual Y-axis 142-659-9# KDL64 Stage, 6x4x360°, X-Y-Theta Motorized 142-679-9# KDL66 Stage, 6x6x360°, X-Y-Theta Motorized  DISK HOLDERS / HUBS 142-264-22 Hub for 7 mm / 25 mm I.D. Disks  142-264-23 Hub for 12 mm / 20 mm I.D. Disks  142-264-25 Hub for 15 mm / 25 mm I.D. Disks 142-264-27 Hub for 20 mm / 25 mm I.D. Disks  142-264-28 Hub for 25 mm / 40 mm I.D. Disks 142-264-60 Vacuum System for Disk Stage, with Valve & Hoses 142-264-61 Vacuum Hub for 7 mm I.D. Disks (requires p/n 13-9458.00) 142-264-66 Vacuum Hub for 20 mm I.D. Disks (requires p/n 13-9458.00) 142-264-67 Vacuum Hub for 25 mm I.D. Disks (requires p/n 13-9458.00)  ORDERING INFORMATION 1) A microscope stage mount MUST be specified (see Mounting), otherwise D102 Hole Pattern will be provided. 2) For motor type type, please specify # as:      5 = Advanced DC Servo, 0.5um encoders, 75 mm/sec      7 = Stepper, 0.08um steps, up to 35 mm/sec 3) Order a Motor Controller and Software.   DIMENSIONAL SPECIFICATIONS